Celestron StarSense Explorer dx 102az: Best Beginner Telescope?

What is the best beginner telescope? That's a question that all beginners ask . . . but it's also one that often crosses the minds of more experienced astronomers. In my case -- after more than 30 years of casual astronomy -- I still consider myself a beginner. Maybe I'm an advanced beginner, but still a beginner.

My opinion is that the best beginner telescope -- bar none -- is this one (if the price is under $400):

Celestron StarSense Explorer dx 102az

I'll go one step farther and say that this is the best grab-and-go scope on the market today. It has several very nice features: 

1. It's a refractor so there is no fussing with collimation. And you don't need to worry about your primary mirror collecting dust at the bottom of a deep tube. The 102 mm objective grabs enough light to see plenty of dim, fuzzy star-clusters and galaxies. The 660 mm focal length is just enough to allow magnification for planetary observing.
2. It has a simple alt-az mount. These mounts don't require counterweights so the entire scope can easily be lifted and carried to different locations in a suburban yard. Those pesky trees and neighborhood lights can be rendered less bothersome when a scope is so easily moved. The whole rig weighs less than 15 pounds.
3. The red-dot finder is a classic (fairly simple) system for locating objects in the night sky.
4. The included 25 mm Plossl eyepiece provides low 25x magnification with a wide field of view (2.3 degrees) and a pleasing 3.9 mm exit pupil. All of the Great Orion Nebula fits nicely into this field of view.
5. The included 10 mm Plossl eyepiece provides useful higher magnification (65x). This lets you enjoy Jupiter and its moons, knocking the brightness down enough so that you should be able to see some banding and the shadows of crossing moons.

But there are plenty of telescopes with those features (including my own grab-and-go). What sets the StarSense Explorer line of scopes apart is the "killer" phone app. Celestron has created a very clever mount to hold your cell phone on the altitude axis of the mount. A mirror directs of phone's camera lens toward the exact spot in the night sky that your scope sees. The StarSense app (which is similar to Celstron's classic SkySafari and SkyPortal app) uses arrows to guide you as you shove the main tube until it is aimed directly at any deep-sky object you select from a menu or from the star chart on the phone's display. Once you have selected something and pointed the scope at it, the app gives you an abundance of information, frequently including a brief audio lecture. One word of warning: you do need a modern phone (post-2016) that includes both an accelerometer and a gyro to get the directional pointing to work.

So that's great. For just $400 I could buy a brand-new grab-and-go scope with all the benefits and none of the drawbacks of a fully computerized scope. The thing is -- I already have a mighty nice grab-and-go scope:

That's a heavily modified Celestron NexStar 102SLT Computerized Telescope. I ripped the guts of the motorized drives out after knocking the whole rig over in the dark one night. I removed the red-dot finder and installed my foam finder. And, if you look closely, you'll see that I installed a mount for my phone right on top of the tube, as well as an inclinometer and setting circle. This means that the features of the SkyPortal app work just fine. Using the altitude and azimuth values provided by SkyPortal, I can aim at any deep sky object and be pretty sure I'll find it in my low-power field of view. The app also gives me a great star map to consult in the dark, and it gives me almost encyclopedic access to written and audio information. 

I still find my paper charts and printed notes are important to me and I'll still continue to get lost in space, . . . but the app, the inclinometer, and the setting circle can certainly help me find my way out again! 

DIY Telescope Finder Scope -- Better Than a Telrad?

All astronomers face one big problem: How do we find anything in that enormous night sky? It can be hard to find the full moon when just panning around at 25x magnification! Finder scopes are the answer, and I would say that the Rolls Royce of finders is the combination of a well-collimated laser along with a well-colliminated 10x50 right-angle monocular. But 10x50 finders are heavy and expensive. Lasers rely on battery power and present risks of causing eye damage to others if used inattentively.

Red-dot finders are a less expensive alternative, while Telrads cost a little more but are easier to use. Both rely on batteries. Both produce unmagnified direct views of the sky. The problem with the red-dot finder is that it is easy to knock out of alignment and it is sometimes surprisingly hard to actually see the red dot. Sometimes I have to crane my head around uncomfortably for quite some time at a very awkward angle. The Telrad pretty much solves those problems.

But I think the DIY finder pictured above is even better. It weighs almost nothing, it costs next-to-nothing, and it is surprisingly easy to make. It's easy to align. You never have any problem pointing at the right patch of sky. And you never need batteries -- though a red flashlight can be handy and make it work exactly like a Telrad. Here are some pictures of the finder mounted on a short-tube 102mm refractor:

You can see, by the way, that I've got this scope "souped-up" with a DIY 10x50 finder that I made from a pair of cheap binoculars, some old mailing tubes, and plumbing parts. I'll probably leave the 10x50 on the scope as a convenient way to scan the sky at low power; but I don't need it at all as a finder scope!

I may make a YouTube video about constructing this foam&wire finder, but until I do so, here are some instructions that probably tell you all you need to know:

Instructions

1. Cut out and sand the edges of a 2" diameter cylinder of 1" closed-cell foam: One each for front and back sights. (Closed-cell foam is sold in sheets at most lumberyards. It is often pink or blue and sands much better than the white open-cell foam.)
2. Sand the bottom of each foam cylinder to the radius of the telescope tube. Wrap a sheet of 60-grit sandpaper around a cup, pitcher, or plastic container of the proper diameter.
3. Cut three 7" lengths of copper wire (18 gauge). Grab with vice-grips 1" from one end and right at the other end. Twist the three strands together. Do the same thing with 3 strands 6" long.
4. Bend the stranded wire over a 1" broomstick so that the inch of the untwisted end is free. Twist tightly around the broomstick to form the eyesight. Bend and twist the 6" strand around a 3/4" screwdriver handle or something similar.
5. Slightly spread the untwisted strands on the end of one eyesight. Then (while pushing the ends together slightly) shove them into the center of one of the foam pieces. The wire should spread as you push it in, thus holding the eyesight firmly in the foam. Repeat with the other eyesight.
6. Spread 1/8 teaspoon of baking soda onto the top of the foam and push it into any gaps where the wire enters the foam. Scrape off all the baking soda that cannot be pressed into the holes.
7. Put a couple of dabs of gel superglue onto the wire and baking soda where it enters the foam and spread it thoroughly and forcefully into any gaps.
8. Paint the foam with black enamel (or any other preferred color).
9. Put a piece of carpet tape onto the bottom of each eyesight. Stick the front eyesight onto the tube where wished. Focus the telescope on a distant object and attach the rear eyesight where it lines up. Collimate by bending the wire loops as necessary.
10. Now, enjoy the best finder scope that money can't buy!